Panasonic KXTG4500B Telephone User Manual


 
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 83
Telephone settings
Selecting the flash time
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
100ms”, “110ms”, “250ms”, “300ms”,
400ms”, “600ms”, or “700ms”.
Each line has its own setting. The default
setting for all lines is “700ms”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {<} or {>}, then press
{ENTER}.
3 Scroll to “Set telephone line” by
pressing {<} or {>}, then press
{ENTER}.
4 Scroll to “Set flash time” by
pressing {<} or {>}, then press
{ENTER}.
5 Press {f} or {g} to select the desired
line.
6 Press {<} or {>} repeatedly to select
the desired setting, followed by
{ENTER}.
L Confirmation tone is heard.
Note:
LThe setting should remain at 700 ms
unless pressing {FLASH} fails to pick up
the Call Waiting call.
LIf the unit is connected via a PBX, certain
PBX functions (call transferring, etc.)
may not work correctly. Consult your
PBX supplier for the correct setting.
Line selection for outgoing calls
When line selection is set to auto, the
cordless handset and base unit
automatically selects a line when you
press {C} or {s} on the cordless
handset, or press {SP-PHONE} or lift the
handset on the base unit.
The base unit and each handset can also
be set to select a priority line for outgoing
calls, if available. The line selection for the
cordless handset(s) and base unit are set
separately. The default is “Auto”.
The five available line selection settings
ou.019(dsetical)-(automat0042 Twei)-6.cTc0.00(se)-5.8(lectmanuaical)-6ly6.7(to auto, th)-5(e )]TJ0 5(e 36 TD-0.rs5 Tc0gaon)-5dse6 Tw[ics5 Tc0TDine3.5mods5 Tc01.1( )30.5-.7(t)it are set