Filter
Top Products
Making/Answering Calls
For assistance, please visit http://www.panasonic.com/phonehelp 31
Holding a handsfree conversation
1 Press {s}.
L An available line is automatically
selected and the line is displayed (to
change the line selection, see
page 83).
L “
SP-phone” is displayed.
2 Dial the phone number.
L The dialed number is displayed.
L After a few seconds the display will
show the length of the call.
3 When the other party answers, talk into
the microphone.
4 When finished talking, press {OFF} or
place the cordless handset on the
charger.
For best performance:
LTalk alternately with the caller in a quiet
room.
LIf the other party has difficulty hearing
you, press {V} to decrease the speaker
volume.
LDuring a call you can switch from the
receiver to the speakerphone by
pressing {s}. To switch back to the
receiver, press {C}.
Dialing after confirming the entered
number
1 Enter the phone number.
L To correct a digit, press {CLEAR}.
Enter the correct number.
L If a pause is required when dialing,
press {PAUSE} where needed
(page 41).
L To cancel, press {CLEAR} and hold, or
press {OFF}.
2 Press {C} or {s}.
L You can press a line key instead of
pressing {C}or
{s}.
L The line number is displayed.
L After a few seconds, the display will
show the length of the call.
3 When finished talking, press {OFF} or
place the cordless handset on the
charger.
Adjusting the cordless handset volume
Three levels (high/medium/low) are
available.
While using the receiver, press {V} or {^}
repeatedly.
Adjusting the speaker volume
Six levels (high to low) are available.
While using the speaker, press {V} or {^}
repeatedly.
Lighted cordless handset keypad
The cordless handset dialing keys light
when a call is received or a key is pressed.
The lights go out about 10 seconds after
pressing a key, lifting the cordless handset
off the charger or answering a call.
Adjusting the volume if you have an
optional headset
Refer to “To connect an optional headset
to the cordless handset” on page 98 for
details on attaching a headset.
Three volume levels are available.
Example:
Example:
Example:
MuteMenu
00-01-30
Talk Line1
L1
2
Low
Volume
High
2
L1
Low
Volume
High
2
L1