Filter
Top Products
Making/Answering Calls
32 For assistance, please visit http://www.panasonic.com/phonehelp
Press {V} or {^} repeatedly during a call to
increase or decrease the volume.
Each time you press {V} or {^} the volume
level will change.
Redialing the last number dialed
Press {C} or {s}, then press {REDIAL}.
Making a call using the redial list
The last ten different phone numbers
dialed from the cordless handset are
stored in the redial list.
1 Press {REDIAL}.
L The last number dialed is displayed.
L If “
No items stored” is displayed,
the list is empty.
2 Press {V} or {^} repeatedly to scroll
through the list, or press {REDIAL}
repeatedly until the desired number is
displayed.
L To exit the list, press {OFF}.
3 Press {C} or {s}.
Dialing speed dial numbers
Refer to “Storing speed dial numbers” on
page 90 for details of how to set-up speed
dial keys.
1 While in standby mode, press and hold
a dial key ({0} to {9}) for more than
three seconds.
L The assigned speed dial for the key is
displayed.
L If a speed dial number has not been
assigned to this key, “
No Number” is
displayed.
2 Press {C} or {s}.
L You can press a line key instead of
pressing {C}or
{s}.
L The speed dial number is called.
Note:
LThis function can be used with the
handset or in handsfree mode
(page 31).
Answering calls
Four external calls can be handled
simultaneously (or two intercom calls) by
the base unit and three cordless handsets
(or by four cordless handsets). When a call
is received, the unit rings and “Incoming
call” is displayed. The called line
indicator on the base unit flashes quickly,
and the line status icon flashes quickly on
the cordless handset display.
The line is automatically selected when the
call is answered.
If you subscribe to a Caller ID service, the
calling party’s information will be displayed
after the first ring (page 47).
To view the Caller ID information, wait until
the second ring to answer a call.
When an intercom call (page 35) and an
external call are received at the same time,
the information for each call will be
displayed alternately. Press {SP-PHONE}
or go off-hook (using the base unit) or
press {C} or {s} (using the cordless
handset) to answer the intercom call.
Press the line key to answer the external
call.
Note:
LWhen the base unit and cordless
handset ringer volumes are set to OFF,
they will not ring.
“Ringer off” is also
displayed while the base unit/cordless
handset(s) is in standby mode
(page 79).