Filter
Top Products
59
Answering System
Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager
number as follows.
1
Follow steps 1 through 6 on page 58.
2
#
Enter the 1-800 pager number, and press (REDIAL/PAUSE)
3 times.*
$
Enter the PIN code, and press (REDIAL/PAUSE) twice.*
•The entered number is displayed on the base unit.
•If you misdial, press (CLEAR) and enter the correct number.
•You can enter a total of 44 digits.
3
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).
* Pager companies require a delay after the pager number and the PIN
code are dialed. Contact your pager company regarding the required
pause time. Pressing (REDIAL/PAUSE) once creates a 3.5 second
delay and counts as one digit.
•If the line has rotary or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 2.
•Alphanumeric voice dispatch pager services will not work with this function.
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing (REDIAL/PAUSE) once creates a
3.5 second delay and counts as one digit.
•If the line has rotary or pulse service, press (TONE) between the pager number
and (REDIAL/PAUSE) in step 7.
8
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).