Filter
Top Products
24
Preparing the Answering System
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2” to “7” or “Toll saver”*.
Your phone comes from the factory set to “Toll saver”*.
1
Press (FUNCTION/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press á (Yes key).
4
Press Ö or Ñ repeatedly until the arrow
points to “TAD program”.
5
Press á (Yes key).
•The base unit display shows programming
options.
6
Press (2).
•The current setting is displayed on the base
unit.
7
Press (0), or (2) to (7) to set the number of rings.
0: Selects “Toll saver”*.
2–7: The unit will answer after the selected number of rings.
8
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).
*Toll saver
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
H
Program
Calling pager
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes
Set dial mode
H
TAD program
GF H
=Yes
Answering
system setting.
See base unit.
H
Save directory
Ringer volume
GF H
=Yes
Number of rings
:Toll saver
Base unit display