Filter
Top Products
One-Touch Dialer
40
You can store a phone number in the (DIRECT) button of the handset. The
stored number is dialed with a one-touch operation.
Storing a Phone Number in the DIRECT Button
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/CH).
2
Press Ö or Ñ repeatedly until the arrow
points to “Program”.
3
Press á (Yes key).
4
While the arrow points to “Save
DIRECT#”, press á (Yes key).
5
Enter a phone number, up to 22 digits.
•Each time you press (CLEAR) the digit to the
left of the cursor is erased. To erase all digits,
press and hold (CLEAR).
•The last 32 digits number you entered will be
displayed. To confirm the remaining number, press
Ü or á.
6
Press Ö (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
7
Press á (Save key).
•A beep sounds.
•To return to the standby mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 52).
To erase the stored number:
Press and hold (CLEAR) in step 5.
IH G
=Next
1234567890123456
789012
IH G
=Next
1234567890123456
789012
F
=Edit
H
=Save
1234567890123456
789012
Save DIRECT#
Ringer volume
H
Program
GF H
=Yes
H
Save DIRECT#
Set flash time
GF H
=Yes