Filter
Top Products
17
Preparation
Selecting the Ringer Volume
You can set the handset and base unit ringer volumes to HIGH, LOW or
OFF. If set to OFF, the handset/base unit will not ring. Your phone comes
from the factory set to HIGH.
Handset ringer volume
Make sure the unit is in the standby mode initially.
1
Press (FUNCTION/CH).
2
Press Ö or Ñ repeatedly until the
arrow points to “Ringer volume”,
and press á (Yes key).
3
Press Ö or Ñ to select the
desired volume.
•The selected volume is displayed and
rings.
•To turn the ringer OFF, press and
hold Ö until 2 beeps sound. When
set to OFF, “Ringer off” will flash
for about 45 seconds before the
handset returns to the standby mode.
To turn the ringer ON, press Ñ in step 3.
•The ringer will sound at the LOW level.
•You can also select the ringer volume while a call is being received. Press Ö or
Ñ while the unit is ringing.
•When you replace the battery, the ringer volume will return to HIGH (factory
preset).
Base unit ringer volume
Make sure the unit is in the standby mode initially. (You can also select
the ringer volume while a call is being received.)
•To select HIGH or LOW, press (RINGER).
Each time you press the button, the selected ringer volume will be
displayed and ring. (Refer to the handset display above.)
•To turn the ringer OFF, press and hold (RINGER) until 2 beeps sound.
“Ringer off” will be displayed and will keep displaying in the standby
mode.
•To turn the ringer ON, press (RINGER).
The ringer will sound at the HIGH level.
Save directory
H
Ringer volume
GF H
=Yes
Ringer
Low ❚❚❚❚❚❚ High
GF
Ringer
Low ❚❚❚❚❚❚ High
GF
HIGH
LOW
Ringer off
OFF