Filter
Top Products
Preparation
For assistance, please visit http://www.panasonic.com/consumersupport 9
If you subscribe to a DSL service
LPlease attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 27) do not
function properly.
Battery installation
1 Insert the battery (1), and press it
down until it snaps into the
compartment (2).
2 Close the handset cover.
Battery charge
Place the handset on the base unit or
charger for 6 hours before initial use.
LMake sure to place the handset with the
keypad facing up to charge the handset
battery. If the keypad is not facing up, the
handset battery can not be charged.
LThe unit will beep once, the CHARGE
indicator will light, and “Charging” will
be displayed.
L“Charge completed” is displayed
when the battery has been fully charged.
The CHARGE indicator will remain lit.
LIf you attach the shoulder rest
attachment to the handset (page 59),
charge the handset using the charger.
Note:
LTo ensure the battery charges properly,
clean the charge contacts of the
handset, base unit and the charger with
a soft, dry cloth once a month. Clean
more often if the unit is subject to
grease, dust, or high humidity.
2
1
CHARGE Indicator
Base unit
CHARGE Indicator
Charger unit
TG2388.book 9 ページ ２００５年７月１４日 木曜日 午後４時５８分