Filter
Top Products
Making/Answering Calls
18 For assistance, please visit http://www.panasonic.com/consumersupport
To put a call on hold
1 Press {HOLD/INTERCOM} during a
conversation.
L“Line on hold.” is displayed.
2 Press {HOLD/INTERCOM} again.
L“Hold” is displayed.
LYou can search the caller list or
phonebook while a call is on hold. To
exit the list, press {OFF}. The call will
remain on hold.
To return to the call, press {C} or {s}.
Note:
LThe base unit user can also take the call
by pressing {SP-PHONE}.
LIf another phone is connected on the
same line (page 8), you can also take
the call by lifting its handset.
LIf a call is kept on hold for 6 minutes, an
alarm tone will start to sound and the
Ringer/Message Alert indicator will start
to flash rapidly. After 4 additional
minutes on hold, the call will be
disconnected.
Using the base unit
1 Press {SP-PHONE}.
LThe SP-PHONE indicator lights.
L“BC” displays.
2 Dial a phone number.
LThe base unit announces each button
you press, including {1} to {0}, {*}
(“Star”), {#} (“Pound”), and {FLASH/
CALL WAIT} (“Flash”).
3 When the other party answers, talk into
the MIC (microphone).
4 To hang up, press {SP-PHONE}.
LThe indicator light goes out.
Note:
LTo switch to the handset while using the
base unit speakerphone:
– If the handset is off the base unit or
charger, press {C} or {s} on the
handset, then press {SP-PHONE} on
the base unit.
– If the handset is on the base unit , just
lift up the handset.
LIf the Base Unit Talking Keypad is turned
off (page 44), the base unit will not
announce the entered number.
The handset will not make
announcements, when:
Lthe Name Announcement is turned
off
Lthe Answering System is in use
Lthe handset has lost communication
with the base unit
Lthe base unit is announcing
Lthe base unit is making an outside
call.
{REDIAL}
VOLUME
{<}, {>}
MIC
{HOLD/CONF}
{SP-PHONE}
and Indicator
TG2388.book 18 ページ ２００５年７月１４日 木曜日 午後４時５８分