Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/consumersupport 65
Answering System
Problem Cause & Remedy
The Answering System is
on, but incoming
messages are not
recorded.
LThe recording time is set to “Greeting only”. Select “1
minute”, “2 minutes” or “3 minutes” (page 54).
LMemory is full. Erase unnecessary messages
(page 49)
“ E ” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
LMemory is full. Erase unnecessary messages
(page 49).
You cannot operate the
Answering System from
the base unit or the
handset.
LIf another user is in use, you may not be able to operate
the Answering System. Try again later.
LIf another user is listening to messages or the
Answering System is handling a call, you cannot
operate the Answering System. Try again later.
LWhen the unit is announcing a list item (name or phone
number) or a dialed number, you cannot operate the
Answering System. Try again later.
You cannot operate the
Answering System from a
touch tone phone.
LMake sure you entered the correct remote code
(page 54).
LThe Answering System may not respond if the tones
are too short to activate the unit. Press each button
firmly.
LThe Answering System is off. Turn it on (page 47).
You cannot erase
messages.
LWhile another user is operating the Answering System
or a caller is leaving a message, you cannot erase
messages.
When you play back
messages or turn on the
Answering System, the
handset and base unit
announce the wrong day
and time.
LThe date and time may be set incorrectly. Set the date
and time again (page 15).
TG2388.book 65 ページ ２００５年７月１４日 木曜日 午後４時５８分