Panasonic KX-TG2388 Cordless Telephone User Manual


 
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 35
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^} to scroll through the menu, and press {Select} when the desired menu item or setting
is displayed.
Important:
LBefore programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
LYou can also program features using “direct commands”—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting
(page 37).
During programming:
LTo exit programming, press {OFF} at any time.
LTo go back to the previous menu, press {Back}.
LIf you do not press any buttons for 60 seconds, the handset will exit programming mode.
LIf the unit detects a problem, an error message will be displayed (page 60) and/or error
beeps will sound.
Main menu Sub-menu 1 Sub-menu 2 Page
Message play ——50
Accessibility Base Announce Dial number 44
HS Announce Pre-Dial number 44
Name List 44
Hearing Aid Mode —44
Ringer setting Ringer volume —39
Ringer tone —39
Incoming call. —40
Date and time ——15
Talk Caller ID ——41
TG2388.book 35 ページ 2005年7月14日 木曜日 午後4時58分