Panasonic KX-TG2388 Cordless Telephone User Manual


 
Making/Answering Calls
16 For assistance, please visit http://www.panasonic.com/consumersupport
Making calls
Using the handset
1 Lift the handset and press {C}.
LTalk” is displayed.
2 Dial the phone number.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
To use the speakerphone
1 Lift the handset and press {s}.
LSP-phone” is displayed.
2 Dial the phone number.
3 When the other party answers, speak
into the microphone.
4 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
LTalk alternately with the caller in a quiet
room.
LIf the other party has difficulty hearing
you, press {V} to decrease the speaker
volume.
LWhile on a call, you can switch from the
receiver to the speakerphone by
pressing {s}. To switch back to the
receiver, press {C}.
To dial after confirming the entered
number (Pre-dial)
1 Enter the phone number.
LThe handset announces each button
you press, including {1} to {0}, {*}
(“Star”), {#} (“Pound”), {FLASH/
CALL WAIT} (“Flash”) and {Pause}.
LThe announcement is heard at the
speaker volume. To increase or
decrease volume, press {^} or {V}.
LIf you misdial, press {Clear}. Enter
the correct number.
LIf a pause is required when dialing,
press {Pause} where needed
(page 17).
LTo cancel, press {OFF}.
2 Press {C} or {s}.
3 When finished talking, press {OFF} or
place the handset on the base unit or
charger.
Note:
LIf the Handset Talking Keypad is turned
off (page 44), the handset will not
announce the buttons you press.
{V}, {^}
{REDIAL}
Microphone
{OFF}
{HOLD/INTERCOM}
Display
{C}
{s}
Soft Keys
The handset will not make
announcements, when:
the Handset Talking Keypad is turned
off
the Answering System is in use
the handset has lost communication
with the base unit
the base unit is announcing
the base unit is making an outside
call.
TG2388.book 16 ページ 2005年7月14日 木曜日 午後4時58分