Filter
Top Products
Answering System Features
48 For assistance, please visit http://www.panasonic.com/consumersupport
4 Press {OFF}.
LTo turn the Answering System off, press
{0} in step 3. “Answer off” is heard.
Screening your calls
While a caller is leaving a message, you
can listen to the call through the base unit’s
speaker. To adjust the speaker volume,
press VOLUME {>} or VOLUME {<}
repeatedly.
You can answer the call by pressing {C}
or {s}.
To turn off the call screening feature
When the base unit is not in use, press
{GREETING CHECK}, then press
VOLUME {<} repeatedly until “0” is
displayed.
OR
While screening, press VOLUME {<}
repeatedly until “0” is displayed.
Note:
LIf the incoming call monitoring feature is
turned off, it will remain off when the next
call is monitored.
LIf you adjust the speaker volume while
playing back messages or using the
speakerphone, the speaker volume for
monitoring will be turned on again. To
turn the speaker volume off, see “To turn
off the call screening feature” of above
step.
Listening to messages
When new messages have been
recorded:
– The NEW MESSAGE indicator on the
base unit will flash.
– The Ringer/Message Alert indicator on
the handset will flash slowly if the
message alert feature is turned on
(page 55).
The base unit display will show the number
of messages (old and new) recorded by
the answering system.
Example: The total number of recorded
messages is 10.
Listening to messages using
the base unit
Press {MESSAGE/SLOW TALK}.
LThe unit will announce the number of
new messages and will play back the
new messages.
LWhen you have no new messages, the
unit will announce “No new messages.
All message playback”, and will play
back all messages.
{MESSAGE/SLOW TALK}
NEW MESSAGE Indicator
{STOP}
{ERASE}
{REPEAT}{SKIP}
TG2388.book 48 ページ ２００５年７月１４日 木曜日 午後４時５８分