Panasonic KX-TG2388 Cordless Telephone User Manual


 
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 39
Ringer settings
Handset ringer volume
4 levels (high/medium/low/off) are
available.
1 Press {MENU}.
2 Scroll to “Ringer setting” by
pressing {V} or {^}, then press
{Select}.
3 Press {Select} at “Ringer volume”.
4 Select the desired volume level by
pressing {V} or {^}.
LThe volume will change and ring.
LThe number of steps indicates the
volume level.
LTo turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5 Press {Save}.
Note:
LWhen the ringer volume is set to off, the
handset will not ring for outside calls.
The handset will ring at the low level for
intercom calls.
LWhen the ringer volume is set to off, the
handset will not announce caller names
(page 27).
LIf the handset ringer is turned off, “Ringer
off” will be displayed while not in use. If
the handset is off the base unit or charger
when there are missed calls (page 28) or
new messages (page 49), “Ringer off
is not displayed.
LYou can adjust the ringer volume while
an outside call is ringing. Press {V} or
{^} while the handset is ringing.
Temporary ringer off
While the handset is ringing for an outside
call, you can turn the ringer off temporarily
by pressing {OFF}. The handset will ring
again as normal the next time a call is
received.
Base unit ringer volume
To set the ringer volume to high (preset),
medium, or low, press VOLUME {<} or
{>}.
LTo increase volume, press VOLUME
{>}. To decrease volume, press
VOLUME {<}.
LTo stop ringing, press {STOP}.
To turn the ringer off, press and hold
VOLUME {<} until 2 beeps sound.
L
O” is displayed.
To turn the ringer on, press VOLUME {>}
or {<}.
LThe base unit will ring at low level.
LYou can adjust the ringer volume while
an outside call is ringing. Press
VOLUME {<}
or {>} while the base
unit is ringing.
To turn the ringer off, press and hold
VOLUME {<} for 2 beeps sound.
O” is displayed.
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 tones and 4 melodies.
Important:
LYou cannot change the ringer tone for
intercom calls.
LIf you subscribe to a Distinctive Ring
Service (such as IDENTA-RING) from
your telephone company with 2 or 3
consecutive rings, select a bell ringer
pattern (Tone 1 to 3). If you select a
melody pattern, you will not be able to
distinguish lines by their ringers.
LIf you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
the caller hangs up before you answer
the call, or
TG2388.book 39 ページ 2005年7月14日 木曜日 午後4時58分