Filter
Top Products
Preparation
8 For assistance, please visit http://www.panasonic.com/consumersupport
Connections
Note:
LBase unit: Use only the included Panasonic AC adaptor PQLV1.
LCharger unit: Use only the included Panasonic AC adaptor KX-TCA1.
LThe AC adaptors must remain connected at all times. (It is normal for the adaptors to
feel warm during use.)
LThe AC adaptors should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptors to a ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become disconnected.
LIf your unit is connected to a PBX which does not support Caller ID, you cannot access
Caller ID services.
LThe unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using the Panasonic
KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a
Panasonic battery back-up power supply noted on page 4.
Fasten the cords.
Hooks
Single-Line Telephone Jack (RJ11C)
Telephone
Line Cord
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
*Noise Filter
(For DSL users)
*Not included
Power Outlet (AC 120 V, 60 Hz)
AC Adaptor
Charger unit
Base unit
TG2388.book 8 ページ ２００５年７月１４日 木曜日 午後４時５８分