Panasonic KX-TG2388 Cordless Telephone User Manual


 
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 43
4 Select “Off” or “On” by pressing {V} or
{^}.
5 Press {Save}, then press {OFF}.
Auto talk
When this feature is turned on, you can
answer a call by lifting the handset off the
base unit or charger without pressing {C}
or {s}.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Auto talk” by pressing {V}
or {^}, then press {Select}.
4 Select “On” or “Off” by pressing {V} or
{^}.
5 Press {Save}, then press {OFF}.
Note:
LIf you subscribe to Caller ID service and
want to view the caller’s information on
the handset display after lifting up the
handset to answer a call, turn off this
feature.
Flash time
Using the handset
The flash time depends on your telephone
exchange or host PBX.
You can select: “90ms” (milliseconds),
100ms”, “110ms”, “250ms”, “300ms”,
400ms”, “600ms”, or “700ms”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {Select}.
4 Scroll to “Set flash time” by
pressing {V} or {^}, then press
{Select}.
5 Select the desired time by pressing {V}
or {^}.
6 Press {Save}, then press {OFF}.
Note:
LThe setting should stay at 700 ms unless
pressing {FLASH/CALL WAIT} fails to
pick up the Call Waiting call.
LIf PBX functions do not work correctly,
consult your PBX supplier for the correct
settings.
Line mode
If “Line in use” on the handset and
B S” on the base unit are not
displayed properly, the line mode selection
is incorrect. Set line mode to “A”.
1 Press {MENU}.
2 Scroll to “Initial setting” by
pressing {V} or {^}, then press
{Select}.
3 Scroll to “Set tel line” by pressing
{V} or {^}, then press {Select}.
4 Scroll to “Set line mode” by pressing
{V} or {^}, then press {Select}.
5 Select “A” or “B” by pressing {V} or {^}.
6 Press {Save}, then press {OFF}.
TG2388.book 43 ページ 2005年7月14日 木曜日 午後4時58分