Filter
Top Products
2.6.7 Utility—Message File Transfer PBX to PC
Transfers Outgoing
Message (OGM) files from the MSG/ESVM card/block mounted on an OPB/IPCMPR card
to the PC.
This option is only available at Installer level.
Note
• When transferring to or from an MSG/ESVM card mounted on an OPB card, the OPB card must be
set to OUS status.
• When transferring to or from the built-in ESVM block on the IPCMPR card, the ESVM block must be
set to OUS status.
To transfer OGMs to the PC
1. From the
Utility menu, select Message File Transfer PBX to PC.
2. From the upper drop-down list, select the target MSG/ESVM card/block.
3. From the lower drop-down list, select the messages to transfer.
• To transfer a certain message, select the number of that message.
• To transfer all messages at once, select "ALL".
The Save dialogue box will be displayed.
4. Enter a file name.
5. Click Save.
6. Click OK.
When you choose to transfer all messages, each message is saved as an individual file, with a number
appended to the file name corresponding to that message’s location on the MSG/ESVM card/block.
When complete, the display will return to the main screen.
PC Programming Manual 73
2.6.7 Utility—Message File Transfer PBX to PC