Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held Party)
Enables the
transfer of related CLIP information when a party on hold is transferred. When set to "Enable", the
transfer destination will receive the original caller’s CLIP information, not the information of the extension that
performed the transfer.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Send CLIP of CO Caller to ISDN—when ICD Group with Cellular Phone
Selects
whether
the CLIP number of the calling party or of the virtual PS is sent to the virtual PS’s forwarding
destination to identify the origin of a trunk call received at an ICD Group containing a virtual PS.
This setting only applies to calls automatically forwarded to public trunk lines using the virtual PS feature.
Value Range
Disable: The CLIP number assigned to the virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.2.2.3 Outside Destinations in Incoming Call Distribution Group
1.30.6 Network ICD Group
Private Network—Public Call
through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Value Range
0–15
PC Programming Manual 503
4.18 [2-9] System Options