Filter
Top Products
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
ISDN Centrex
Enables the use of the telephone company
’s ISDN Centrex Service features.
Value Range
Disable, Enable
Maintenance Console Location
3.31 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)
—SUMMARY
BRI Data Link (P-MP) Mode
Assigns one
or two TEIs (Terminal Endpoint Identifier) to the BRI CO port. To use the ISDN Hold supplementary
service with point-to-multipoint configuration, this parameter should be set to 2-link in some countries/areas.
Value Range
1-link: One TEI is assigned to the BRI CO port.
2-link: Two TEIs are assigned to the BRI CO port. (Available when
Access Mode on
the Network tab is set
to P-MP.)
Maintenance Console Location
3.31 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
None
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only available
when Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
A maximum of two ports of each BRI card can be assigned to transmit extension status information.
PC Programming Manual 273
3.31 [1-1] Slot—Port Property - BRI Port