Filter
Top Products
2.2.5 Programme launcher—Connect—LAN
Connects to the PBX in Interactive mode through the Local Area Network interface of the PBX.
This option
allows direct entry of connection parameters, for cases where the PC is used to connect to one or
just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs and
would prefer to choose from among pre-saved profiles instead, see 2.2.8 Programme launcher—Connect
—Profile Setup for more details about creating profiles.
To connect to the PBX by LAN
1. From the programme launcher, select Connect.
The Login window will be displayed.
2. Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a. Select the profile to use from the drop-down list.
b. If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
• To enter the parameters manually, select the PBX Model and confirm that the LAN radio button is
selected.
a. Specify the settings as required. For more details, see the table below.
b. Enter the system password for the PBX.
3. Click Connect.
Connection Settings for LAN
Setting Values Explanation
IP Address 1.0.0.0–
223.255.255.255
Specify the IP address of the PBX on the
LAN. Enter the same IP address that was
input in IP Address for IPCMPR Card of
3.4
[1-1] Slot—Card Property - IPCMPR.
Port Number 1–65535 Specify the port number used to access the
PBX via LAN. Enter the same port number
that was input in Maintenance Port
Number
of 3.4
[1-1] Slot—Card Property
- IPCMPR.
PC Programming Manual 41
2.2.5 Programme launcher—Connect—LAN