Filter
Top Products
IP Softphone 2050 Settings
89
Reset button
When you select the Reset button in the following procedures, the phone
resets immediately without any warning.
However, if you make a change to the settings and select Apply or OK,
the phone indicates that a reset needs to take place. A warning message
appears—"IP softphone 2050 must reset for the configuration changes to
be complete. Select Yes to reset now or select No if you plan on resetting
later". You can select Yes to reset now, or No, to defer it until later.
Selecting MAC addresses
To select a MAC address:
1. Click Auto-Create. The Hardware ID text box displays the next
address in a range of addresses.
2. Continue clicking Auto-Create to move through the range of
available addresses, until you find the one you need.
After you click through all available MAC addresses, Auto-Create
generates random hardware ID numbers. Select one of these numbers if
your Ethernet hardware address is not unique to the server.
To return the settings to their installation defaults, click Restore Defaults.
To reset the Hardware ID while the IP Softphone 2050 is running, click
Reset.
Note: The Firmware Version field displays the latest
IP Softphone 2050 firmware version reported by the server.