Filter
Top Products
Programming / 55
P0881594 Issue 01 MICS-XC Norstar-Companion Installer Guide
System prgrming defaults
Companion
Startup programming
After the hardware has been installed and powered up, use
Startup to initialize the system, and select the system template
that best suits your system.
Performing Startup
1. Enter the Startup access code from a Norstar M7310 or
M7324 telephone dial pad, by pressing
which is the
same as
.
Setting PBX default DID default
Registration
Registration
Portable DNs
N
Availble
defaults same as PBX
Radio data
Re-evaluation
Status
Schedule
Radio credits (U.S. only)
Required
Not scheduled
No defaults assigned
defaults same as PBX
Radios
Cell Assignment
Antenna Type
Unassigned
Internal
Cells
Cell radio
Cell nghbrs
Cell rad nghbrs
Unassigned
Unassigned
Unassigned
System LID <random>
Startup erases programming.
Startup erases any existing programmed data,
and resets the system to factory defaults.
p0881594.book Page 55 Tuesday, August 25, 1998 3:59 PM