Filter
Top Products
4
/ Norstar Companion basics
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
Before the Base Stations can be used in the United States,
UTAM codes must be obtained and entered using an
administration terminal or Norstar Remote Utilities (NRU).
See “Software keys (U.S. only)” on page 68 for more detailed
information.
Companion Portable Telephones
- The portable telephones
used with your Norstar system are small, lightweight units
with fully digital performance to provide clear voice quality.
Companion portable telephones feature a three line, 16-
character, alphanumeric display. For more information on the
portable used with your MICS XC system, refer to the
Companion Portable Telephone User Guide
that is supplied
with it.
Before the portables can be used in the United States, portable
credits must be obtained. See “Software keys (U.S. only)” on
page 68
Administration and Maintenance Tools
- Programming of
the Companion system is easily and quickly done through an
M7310 or M7324 digital telephone set. You can assign
portable telephones to the system, check Base Station
parameters, and enable and disable registration.
System programming can also be done using Norstar Remote
Utilities (NRU) software on a personal computer (PC).
Companion Diagnostic Software allows diagnostics to be run
on the wireless system and can be done either locally or
remotely via a PC.
Norstar Voice Mail
- If you are using Norstar Voice Mail
with your Companion system, Version 3.0 is recommended as
a minimum Voice Mail software version.
p0881594.book Page 4 Tuesday, August 25, 1998 3:59 PM