Nortel Networks MICS-XC Telephone User Manual


 
68 / Programming
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
Software keys (U.S. only)
The United States FCC has appointed UTAM Inc. as the body
responsible for coordinating and verifying the installation or
relocation of unlicensed, personal wireless communication
devices. To comply with UTAM Inc., Norstar uses keys and
credits to control user capacity and to ensure system location
verification. These software keys and credits are required to
activate Norstar Companion services on a new or upgraded
system. The credits should have been purchased at the time the
order was placed.
Base Station must be installed and powered first.
Base Stations must be installed and powered before
entering any UTAM Activation Keys. Verify that the
Base Station LED status is solid red and green before
entering any UTAM keys. Failure to follow the correct
order of UTAM key entry may result in a disabled
Norstar Companion system.
Call Northern Telecom Customer Response Center
at 1-800-321-2649 to verify that you have approval
from UTAM Inc. when initially installing wireless
equipment or relocating wireless equipment.
Failure to receive approval prevents you from enabling
wireless communication on the Companion system.
You must provide the Companion ID each time you are
requesting codes or credits.
A disabled wireless system means that Base Stations
and portables are not operational, but registration
information is retained. These devices may be
reactivated by returning the system to its previous
configuration or by entering a UTAM Recovery Key. A
new system is activated by entering a UTAM Activation
Key.
p0881594.book Page 68 Tuesday, August 25, 1998 3:59 PM