Filter
Top Products
58 / Programming
MICS-XC Norstar-Companion Installer Guide P0881594 Issue 01
By using a special password, a system coordinator can see and
change many, but not all, of the programming settings used by
an installer. In this guide, programming that can be changed
only by an installer is marked in the heading. If you are
programming using the System Coordinator Plus password,
you do not see these items when you move through
programming.
1. Press which is the
same as . The
display shows Password:.
2. Enter the System Coordinator Plus password. The default
password is SCPLUS (727587). The display shows
Terminals&Sets. Three triangular indicators appear
on the vertical display between the rows of buttons.
3. Place the programming overlay over the buttons pointed to
by the indicators .
Entering programming using other passwords
A set of the most often used headings and subheadings is
available by using a System Coordinator password. This level
of access is designed for the average user who takes care of the
day-to-day changes to the Norstar system, but who does not
need to use more advanced programming. The default
password is ADMIN (23646).
Norstar features
Refer to MICS-XC Norstar Companion System Coordinator
Guide for a complete list of features supported on Companion
portables.
Portable features
Refer to the Portable Telephone User Guide that is supplied
with your portable.
p0881594.book Page 58 Tuesday, August 25, 1998 3:59 PM