Filter
Top Products
20 Chapter 2 WLAN Handsets overview
NN40050-101NN40050-101
6 Do one of the following:
• Press UP
to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit
from the top-level menu to exit the menu and return to the active
(off-hook) state.
Ring Options
The Ring Options enables you to configure the WLAN Handset ring tone for the three different
ringer types:
Telephone Ring, Auxiliary 1, and Auxiliary 2.
Telephone Ring allows further configuration for:
•
Ring Cadence — controls the ringing rhythm.
•
Ring Tone — controls the ringing tone (see note 1).
•
Ring Volume — controls the ringing volume.
•
Vibrate Cadence — controls the vibration rhythm.
•
Ring Delay — controls how long the vibrate cadence plays before the audible ring starts (see
note 2).
To select the Ring Cadence
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight
Ring Options.
3 Press the Select button (or
OK) to select Ring Options.
4 Press the Up and Down buttons to scroll through the menu and highlight
Telephone Ring.
5 Press the Select button (or
OK) to select Telephone Ring.
6 Press the Up and Down buttons to scroll through the menu and highlight
Ring Cadence.
7 Press the Select button (or
OK) to select Ring Cadence.
Note: Auxiliary 1 and Auxiliary 2 are reserved for future use.
Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.
Note: Ring Delay is not displayed in the menu when Ring Cadence or Vibrate
Cadence is turned off.