Multi-Tech Systems MVP-410ST/810ST IP Phone User Manual


 
Technical Configuration (Analog/BRI) MultiVOIP User Guide
292
the channel over which the call is being originated (for example,
“Calling Party - Omaha Sales Office Line 2”). If that voip channel is
dedicated to a certain individual, the descriptor could say that, as
well (for example “Calling Party - Harold Smith in Omaha”). When
the home voip receives a call from any remote voip, the home voip
sends a status message back to that caller. This message confirms
that the home voip’s phone channel is either busy or ringing or that
a connection has been made (for example, “Busy Party - Omaha
Sales Office Line 2”). These messages appear in the Statistics – Call
Progress screen of the remote voip.
Note that Supplementary Services parameters are applied on a channel-
by-channel basis. However, once you have established a set of
supplementary parameters for a particular channel, you can apply this
entire set of parameters to another channel by using the Copy Channel
button and its dialog box. To copy a set of Supplementary Services
parameters to all channels, select “Copy to All” and click Copy.