Mitel 5560 IPT Telephone User Manual


 
Mitel 5560 IPT User Guide
Campon
When you get a busy tone, you can use the Campon feature to be notified when the busy party
becomes available.
To Campon to a busy station:
Press I Will Wait.
To retrieve a call when you hear the Campon tone:
Use the Trade Call or Call Swap feature with the Trans/Conf hard key or a programmable
line key.
Direct Paging
Direct Paging allows you to page a party through the party’s handsfree speaker. If the paged
party has Off-Hook Voice Announce enabled, the page will be heard even when the party is on a
handset or headset call.
To page a party:
1. Press Left or Right to select the handset or headset you want to use.
2. Press the key you have programmed as Direct Paging or dial the appropriate feature
access code.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
Do Not Disturb
When you enable Do Not Disturb, callers will get a busy tone, and an on-screen text message
indicating that you do not wish to be disturbed. Note: Do Not Disturb only affects the prime line on
the lowermost right-hand key of the left display.)
To activate or deactivate Do Not Disturb:
1. Press the Menu fixed function key.
2. In the Overview menu, press Do Not Disturb. The status line of the right side displays
the Do Not Disturb
icon when the feature is enabled. Do Not Disturb status is also
displayed in the Overview menu beside the application name.
To activate Do Not Disturb for a remote extension:
1. Press Left or Right to select the handset or headset you want to use.
2. Dial the appropriate feature access code.
3. Dial the number of the station to which Do Not Disturb is to apply.
4. Press Release.
To deactivate Do Not Disturb for a remote station:
1. Press Left or Right to select the handset or headset you want to use.
2. Dial the appropriate feature access code.
3. Dial the number of the station with Do Not Disturb activated.
4. Press Release.
32