Filter
Top Products
Mitel 5560 IPT User Guide
End a call
• To end a call and free the line, press the Release button on the side that received the call.
Switch between two active calls
• Press Left or Right accordingly. After switching from Left to Right, the caller on the Left is
maintained but cannot hear your conversation with the caller on the Right.
• If the call being switched to is in Handsfree mode, switch to it by pressing Left or Right (to
associate the Microphone key to the correct call), then Microphone to enable microphone
if necessary. See Handsfree Operation on page 25.
Redial
To redial the last number that you manually dialed:
• Press the key you have programmed as Redial.
Redial - Saved Number
To save the last number that you manually dialed:
1. Press Left or Right to select the handset/headset you want to use.
2. Dial the appropriate feature access code.
To redial a saved number:
1. Press Left or Right to select the handset/headset you want to use .
2. Dial the appropriate feature access code.
Note: The left and right sides of the terminal have separate redial memories. For example, if you
dial a number using the right handset and then switch to the left handset, you cannot save
the right-dialed number on the left handset.
Handsfree Operation
The Speaker fixed function key turns Handsfree on and off. You can have one active call on the
speaker at one time. You can also have an active handset or headset call on the other audio path
simultaneously.
To use Handsfree to make a call:
1. Press Left or Right to select the handset you want to use.
2. Press your Prime Line key or any Line Appearance key. Note: Your administrator must
program Line Appearances.
3. Dial the number.
4. Press Speaker.
5. To speak when the called party answers, do one of the following:
• Press and immediately release Microphone to turn the microphone on continuously
• Press and hold Microphone to use the push-to-talk Microphone feature.
6. To switch between two active calls, see Switch between two active calls on page 25.
25