Mitel 5560 IPT User Guide
Change User PIN
Use this setting to change the PIN that you use during Hot Desk login.
To change User PIN:
1. Press the Menu fixed function key.
2. Press Settings.
3. Press Change User PIN.
4. At the prompt, use the onscreen keyboard or the dial pad to enter your old PIN.
5. At the prompts, use the onscreen keyboard or the dial pad to enter and confirm your new
PIN.
6. Press Save.
Handset Configuration
You can configure your handset to work in Push-to-Talk Mode or in Push-to-Mute mode.
To configure handset:
1. Press the Menu fixed function key.
2. Press Settings.
3. Press Handset Configuration.
4. For Mitel-approved handsets (with pushbutton), select either option. For all other
handsets, select Push-to-Mute (the default setting).
Enable a Screen Saver
You can program your screen saver to turn on after a specific time period of inactivity on your
5560 IPT. Performing this procedure on the left display sets the feature for both displays.
To enable a screen saver:
1. Press the Menu fixed function key.
2. Press Settings.
3. Press Screen Saver.
4. Select the amount of inactivity time that will activate the backlight switch to dim.
5. Press the Display image checkbox if you want the default screen saver image to be
displayed when the backlight dims. (If you do not press this checkbox, only backlight
dimming occurs.)
6. Select a brightness level for the dimmed backlight by pressing Brightness + or
Brightness -.
7. Press Show Brightness to temporarily demonstrate the selected brightness level.
8. Press Save.
Note: The default screen saver displays set type and a copyright notice.
14