Filter
Top Products
5.19 [rom] command
• -print: show versions of all rom files.
• -app,-boot, -dsptest, -dspcore, -dspapp, -rbpcm and -htpcm: upgrade main
boot code, main application code, DSP testing code, DSP kernel code, DSP
application code, Ring Back Tone PCM file and Hold Tone .
• -boot2m:to upgrade 2mb rom file, which includes all firmware file mentioned in
item 2.
Note:
1. After 2mb file download is finished, all configurations might change to
default value, user has to configure again.
2. MAC address might change to default value also, please MUST use
command setmac:
Usage: key in command setmac
key in MAC address with format: 0001a800xxxx
• -s: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware
rom file.
• -f: the file name prepared for upgrading is necessary as well.
• -server: specify TFTP/FTP server IP address. It is corresponding to LCD
configuration -firmware upgrade-Set file Server IP.
• -method: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)
• -ftp: specify user name and password for FTP download method
• For example: User prepares to upgrade the latest app rom file – lp.505, the TFTP
server is 192.168.1.1
rom –app –s 192.168.1.1 –f lp.505(If –server is specified , can just type
55