Filter
Top Products
011010 ====> 26 (Decimal System)
100010 ====> 34 (Decimal System)
Low Priority with DS-field:
Assured Forwarding (AF) 001100 ====> 12 (Decimal System)
010100 ====> 20 (Decimal System)
011100 ====> 28 (Decimal System)
100100 ====> 36 (Decimal System)
001110 ====> 14 (Decimal System)
010110 ====> 22 (Decimal System)
011110 ====> 30 (Decimal System)
100110 ====> 38 (Decimal System)
000000 ====> 0 (Decimal System)
For example, to configure ToS via Telnet command.
usr/config$ tos -rtptype 10
usr/config$ tos -sigtype 10
usr/config$ tos -print
IP Packet ToS information:
Signalling Packet:
DSCP Code: 10 <====== Configure control signal DSCP code
Media Packet:
DSCP Code: 10 <====== Configure RTP (voice) DSCP code
usr/config$
Or, the ToS function can be configured via Web Browser selection by entering the
above DSCP Decimal Code.
This command is for setting IP packet ToS values to determine IP Packets priority on
network.
• -print: display current ToS values configurations.
• -sigtype: configure DSCP value of signaling packets from 0 to 63
• -rtptype: configure DSCP value of RTP packets from 0 to 63
52