Filter
Top Products
OK to confirm it.
(2)
User can adjust ring volume by pressing Í or Î on the keypad to decrease
or increase volume.
4. Indicate
There are two selections to activate or deactivate forward function. After selection
please press OK
Choose Tone Style:
Low Middle High
Ring Volume Control
Forward Type
i. Activate: choose under which situation to forward call to another endpoint.
After selection please press OK, then enter LINE NUMBER of another
endpoint prepared to forward to.
busy status, the incoming call will be
directly forwarded to the assigned phone number.
nse
e
ned phone number.
ii. Deac ter
selec
A. Busy
When SP5100 IP Phone is in
B. No respo
When SP5100 IP Phone is continuing ringing around 10 seconds, th
incoming call will be directly forwarded to the assig
C. Unconditional
It is included the above two types. Whether the IP Phone is in which
status, it will be automatically forwarded to the assigned phone number.
tivate: choose under which situation to deactivate forward function. Af
tion, please press OK, then user can see LINE NUMBER of the
endpoint which is already configured to forward to, now press OK again.
Note: The number that user prepares to forward to is E.164 number
which is registered on the Gatekeeper.
5. Mess
If there n message box . MESSAGE LED
will be flashing until user press MESSAGE to check miss call and re-press
return to main screen.
age Box
is an unanswered IP call, it will be kept i
MESSAGE to
• New Call：to see all incoming-call records in message box.
• History：to see all records in message box.
15