Filter
Top Products
5.5 [commit] command
Save any changes after configuring the SP5100 IP Phone.
5.6 [ifaddr] command
Configure and display the SP5100 IP Phone IP information.
• -ip, -mask, -gate: Set SP5100 IP Phone IP Address, subnet mask and default
gateway respectively.
• -dhcp: When DHCP function enables (ifaddr -dhcp 1), SP5100 IP Phone will
automatically search DHCP server after execute the commit and reboot
command.
• Note: After IP Phone catch a dynamic IP address form DHCP server, user can see
this IP address on LCD connect configuration.
• -sntp: When sntp server is available, enable SP5100 IP Phone SNTP function
and point to sntp server IP address. (ifaddr -sntp 1 “xxx.xxx.xxx.xxx”)
• -dns:User can set Domain Name Server IP address. Once IP Phone can connect
with DNS server, user can specify URL address instead of IP address for
Gatekeeper and phone book IP address. (Please refer to [h323] command and
[pbook] command)
• -timezone: User can set different time zone according to the location IP Phone is.
For example, in Taiwan the time zone should be set as 8, which means GMT+8.
(GMT-8: ifaddr -timezone -8)
• -ipsharing: If SP5100 IP Phone is behind a IP-sharing , user can enable IP
sharing function and specify public IP address.(ifaddr -ipsharing 0 / 1 “public IP
address of IP sharing” , 0 for disable and 1 for enable)
41