Filter
Top Products
5.8 [ping] command
Command ping can test which the IP address is reachable or not.
Usage: ping “xxx.xxx.xxx.xxx(IP address)”
The message will display packets transmitting condition or no answer from the IP
address.
5.9 [pbook] command
The command is for Peer-to-Peer Mode use only. Therefore, VoIP products such as
SP5100 IP Phone that support Peer-to-Peer Mode are also available to be addressed
on the SP5100 IP Phone phone book.
• -print: display phone book data. User can print all data in phone book by command
(pbook –print). Furthermore, user can also print only a section of data by indicating
parameter 'start_record' and 'end_record' (pbook –print “start prefix” “end prefix”). If
parameter 'end_record' is omitted, only record 'start_record' will be display
(pbook –print “start prefix”).
• -add: add a new record in phone book table by give a name and e164 number for
the Gateway / Terminal IP address .
(pbook –add name “X” ip “xxx.xxx.xxx.xxx” e164 “X”)
User can set IP or URL address (Domain Name Server must be configured. Please
refer to [ifaddr] command)
• -search: search any record such as ip address, name and e164 addressed on the
phone book.
• -delete: delete a record with index listed in phone book table. (pbook –delete “index
43