Filter
Top Products
• -ipchange: If user uses NAT device which support multiple public IP address, and
IP Phone enable IP change function, IP Phone will register to Gatekeeper with the
public IP that IP Phone uses but not the IP NAT uses.
• -http: set http port. User can configure IP Phone via web browser, default http port
is 80, if port 80 is not available or user has more than 1 IP Phone behind NAT, http
port can be changed to another available port.
5.7 [time] command
When sntp server is established as well as the sntp function of SP5100 IP Phone is
enabled, type time command should show the current time what is retrieved from the
assigned sntp server.
Note: Please refer to the [ifaddr] command to configure sntp server.
42