Filter
Top Products
4 Upgrade the SP5100 IP Phone
SP5100 IP Phone supports three methods to upgrade the new version. All methods are
necessary to prepare the TFTP program on the host PC as TFTP server. After installing
TFTP program on one PC and connecting to network, SP5100 IP Phone is ready to be
upgraded.
4.1 LCD Panel Control
1.Choose the 1→3 selection-Firmware Upgrade. Press OK to enter into the
sub-selection as below.
2. Download method
There are two methods to download new rom file, please move the “~” symbol
by press Í or Î on the keypad to select TFTP or FTP method, then press OK
to confirm it.
3. Set File Server IP
User has to offer one TFTP/FTP server IP Address and set this IP Address on
the IP Phone keypad. The IP address is necessary for upgrading IP Phone new
application rom file.
4. Set FTP user account
User has to press user name and password for FTP server login .It is
necessary for upgrading IP Phone new application rom file in FTP method.
5. Indicate file name
User has to press the file name of new application rom file prepared for
upgrading
6. Start Download
Press OK to start download new application rom file .
7. Firmware Version
Show versions of all rom files.
Note:
• Download via LCD command can only upgrade new application
rom file.
• If IP Phone fails to upgrade via LCD menu, IP Phone will
automatically reboot.
36