Filter
Top Products
• -maxdealy: set maximum delay of jitter buffer (0~150)
Note: It is for advanced administrator use only. Please ask your distributor before
changing any settings of this command.
5.15 [tos] command
ToS/DiffServ (DS) priority function can discriminate the Differentiated Service
Codepoint (DSCP) of the DS field in the IP packet header, and map each Codepoint to
a corresponding egress traffic priority. As per the definition in RFC2474, the DS field is
Type-of-Service (ToS) octet in IPv4. The recommended DiffServ Codepoint is defined
in RFC2597 to classify the traffic into different service classes. The mapping of
Codepoint value of DS-field to egress traffic priority is shown as follows.
High priority with DS-field.
(1)Expected Forwarding (EF) 101110 ====> 46 (Decimal System)
(2)Assured Forwarding (AF) 001010 ====> 10 (Decimal System)
010010 ====> 18 (Decimal System)
51