Filter
Top Products
5 Advanced Configurations via Telnet
After initializing the SP5100 IP Phone IP Address setting (please refer to LCD Configuration:
1.Connect Configuration), user can enter into configuration mode via telnet.
Note:
● After user enter IP Phone configuration via telnet, please use login : ”root”,
password : ”press enter” to enter command line.
● Each command user must key-in with lower case, but contents of
configurations such as h.323 alias or user name etc, user can set as capital
case.
● User who changes any configuration needs to do the commit command then
reboot command.
5.1 [help] command
Type help, man or ? to display all the command lists. The following figure is shown all
commands of SP5100 IP Phone.
39