Filter
Top Products
Answering Calls
1. Make sure your phone is on. If your phone is off, incoming calls go
to voicemail.
2. When a call comes in, answer the call by pressing . Depending on
your settings, your PCS Phone notifies you of incoming calls in the
following ways:
ᮣ
The phone rings or vibrates.
ᮣ
The LED flashes.
ᮣ
The backlight illuminates.
ᮣ
The screen displays an incoming call message.
ᮣ
If available, the phone number of the caller is displayed.
ᮣ
If the phone number is in your Internal Phone Book, the Phone Book
entry’s name is displayed.
The following options are also displayed. To select an option, press the
corresponding softkey button.
ᮣ
Quietto mute the ringer.
ᮣ
Ignoreto send the call to your voicemail box.
Depending on your settings, you may also answer incoming calls simply
by opening the phone or by pressing any digit. (To answer a call when
you are roaming and Call Guard is enabled, you will be prompted that
roaming rates apply and you must select
Answerto answer the call.
See “Call Guard” on page 51.)
Note: If your phone is off, incoming calls go to voicemail.
3. To disconnect the call, close the phone or press .
Missed Call Notification
When an incoming call is not answered, the Missed Call log is displayed
on your screen.
To display the Missed Call entry:
ᮣ
Highlight the entry and press . (To dial the phone number,
press .)
TALK
OK
END
TALK
Section 2: Understanding Your Phone
22 2A:Your PCS Phone – The Basics