KVH Industries F55 IP Phone User Manual


 
PC Programs Set-up Using RS-232
The transceivers RS-232 configuration shall be (using the
handset user interface):
Baud Rate: 115200 baud
Flow control: Hardware
Setting up your PC
In this section the setting up of a MS-Windows based PC is
described in general terms covering Windows 95, 98, 2000
and NT. The screen dumps below is from Windows 98. For
a detailed description with more screen dumps of the
installations, you are referred to the Application Note
“Configuring SAILOR Fleet77 for MPDS” on your MES
Software distribution disk or at our web site
www.thrane.com.
Step 1: Install a standard modem
From the Control Panel select Modems and add a
Standard modem. Do not let Windows detect the
modem, but manually choose a standard 28800 bps
Modem.
5
Select the appropriate COM port (i.e. the COM port that
is connected to the terminal.
Set maximum speed to 115200
Set Data bits = 8, Parity = None and Stop bits = 1
78 May 2005