Filter
Top Products
Getting Started Use of PIN Codes.
To shut down the system from the transceiver press and
hold the power button for a few seconds, until the handset
display shows the message shown below.
Release the button and the system will shut down.
Note: After a shut down please wait at least 5
seconds, before trying to power up the system again.
Thrane F33
Goodbye
3
3.2 Use of PIN Codes.
Access to some terminal functionality is restricted by PIN
codes. Two different kinds of User PIN codes are used in
the system: one for the Super User and one for the Service
User.
Both PIN codes are composed of digits between 0 and 9
and the length must be between 4 and 8 digits.
The normal everyday user (Normal User) can make and
receive calls, access the phonebook, chose an ocean region
and a default LES, read the alarm log and status and make
calls from the Helpdesk. For a description of these
functions refer to section 4.3 “Menu System”. All other
functionality has to be carried out by a Super User or a
Service User.
Super User
The Super User has the same rights as the Normal User. In
addition the Super User can access the Super User menu
(see section 4.4 for details). A Super User will typically be
a person responsible for setting up and maintaining the
system. It is only possible to have one Super User PIN
26 May 2005