Filter
Top Products
Normal Calls Getting Started
code. If the code is entered incorrectly 3 times, the PIN
becomes blocked. A blocked Super User PIN can only be
unblocked by a PUK code or the Service User. The factory
PIN code is ‘12345678’.
Service User PIN
The Service User has access to all functionality in the Fleet
system, which is accessible through the handset. Only T&T
and/or the supplier of the equipment will normally know
this PIN. If the PIN is entered incorrectly 3 times, the PIN
becomes blocked. Only a PUK code can unblock a blocked
Service User PIN. Refer to the “TT-3088A SAILOR Fleet33
Installation Manual” for the use of the service menu.
3
3.3 Normal Calls
3.3.1 Calling From the TT-3088A
When making calls from a handset or from a fax keypad
just type in the phone number as if you were making an
international call (with prefix for automatic international
calls equal to 00).
Example:
To dial the number of Thrane & Thrane (+45 39558800),
press:
for international calls
for country code then
followed by
or .
The display on the terminal handset will show how the call
proceeds.
May 2005 27