Filter
Top Products
Call Functions Operation
4 Operation
4.1 Call Functions
4.1.1 Calls Using the Phone Book
The phone book can be used to initiate calls, either by
selecting an entry in the phone book, and then pressing
or , or by using the short code. The latter is done
by pressing
followed by the short code. Pressing
afterwards will establish the call. Pressing
instead will
show the actual number and the call can then be
established by pressing
or . Short code 0 contains
the last dialed number, thus
or followed by
will redial the last number.
4
4.1.2 Call From Handset Connected to RJ11
Making a call from a (normal 2-wire PSTN) phone
connected to one of the two analogue RJ11 interfaces is
done in the same way as a call from the handset. Just keep
in mind to press the
key in order to signal the
terminal, that the number is complete.
To Call Thrane & Thrane in Denmark (country code 45) is
done by pressing the following keys on the phone:
When using one of the RJ11 analogue interfaces please
make sure that the selected interface is configured for a
service, which supports voice. See section 4.4.21.Routing
May 2005 33