KVH Industries F55 IP Phone User Manual


 
Operation Menu System - Super User
This menu has been divided into a submenu pr. interface
plus a print menu:
Handset #1
RJ11 #1
RJ11 #2
RS-232 #1
Ethernet
Note 1: The IMN-number has to be defined, before
the service can be routed to an interface. The service
will not be listed in the routing table, unless it has an
IMN-number defined.
Note 2: Some users want the IMN number to reflect
the corresponding telephone number. In this case
the user should EDIT the default IMN number. The
INSERT function is only for adding additional IMN
numbers (or for creating the first IMN in case the list
is empty).
When entering one of the above submenus it is possible to
scroll through a list of all relevant IMN-numbers for the
interface. In the handset menu, you will see all IMN’s
associated with voice: i.e. mini-M voice. If an IMN has an
incoming route to an interface it is marked with “*”. If it
has an outgoing route to an interface, it is marked with a
“#”. It is possible to change the routing-status for each
IMN to the opposite by pressing
for incoming and
for outgoing.
It is possible to route one IMN to more interfaces. E.g. an
IMN can be routed to both RJ11 interfaces at the same
time. This will make it possible, to have an incoming call
being routed to two 2-wire phones simultaneous.
4
48 May 2005