KVH Industries F55 IP Phone User Manual


 
Operation Menu System - Super User
Choose the settings by pressing and press leave
the menu.
The fourth menu item is RJ11 and it contains two sub
items: Notification and Ring Tone. Notification can be
either Yes or No for each of the three RJ11 2-wire
connectors. The item Ring Tone can be used for choosing
a common 2-wire ring tone among eight ring tones. The
ring tones are described with the two symbols ‘#’ (sound)
and ‘ ‘ (no sound). Choose the settings by pressing
and press leave the menu.
The fifth menu item is Pending Time and this value is by
default set to 30 seconds. The Call Waiting Notification will
continue for a number of seconds corresponding to the
value of Pending Time. If the user chooses to ignore the
notification for a longer period the incoming call will be
ignored. Enter a value and press
to save when leaving
the menu. Press to leave the menu without saving.
The last menu items are Caller #1-5 and each of these
can contain a phone number that is allowed to interrupt the
MPDS sessions if this is enabled in the menu item Limit
Calls. Each number can be individually associated with a
ring tone and with the 4-Wire handset and/or a number of
the RJ11 2-Wire connectors. Configuration is done as
described in the menu items Handset and RJ11.
4
66 May 2005