Filter
Top Products
Getting Acquainted
Reference Guide 2–33
7. Follow the on-screen instructions.
8. Tap Finish to exit.
9. Tap Ye s to save a test log file to the My Documents folder.
10. Tap OK to exit.
Manage the Battery
It is recommended that you fully charge the battery prior to using
the iPAQ Pocket PC.Your iPAQ Pocket PC h5400 will not power
on if the battery has a low
charge (less than 3.2 Volts).
It is
recommended that you fully charge the battery prior to using the
iPAQ Pocket PC.
To charge and reset the iPAQ Pocket PC h5400:
1. Connect the iPAQ Pocket PC h5400 to an A/C power supply.
2. Charge the battery to the minimum level of 3.2 Volts. This
will take 5 to 30 minutes depending on the current charge
level.
✎
If the charge on the battery goes below the 3.2 Volts as a result of
not being connected to the universal cradle or the AC adapter, no
damage will occur to the battery. However, the iPAQ Pocket PC
h5400 charge indicator light will not flash until the battery
reaches the minimum charge of 3.2 Volts and you perform a
normal reset.
3. Perform a normal reset (see “Perform a Normal Reset” in the
hp iPAQ Pocket PC Reference Guide on CD).
4. Power on the iPAQ Pocket PC h5400.
To use your battery power effectively, you need to know how to:
■
Install the battery
■
Monitor the battery