Filter
Top Products
Using the Fingerprint Reader
Reference Guide 5–17
5. Tap OK.
6. Tap Ye s to save changes.
Logon Using PIN, Passwords, and
Fingerprints
If you have set up a PIN, password, and/or fingerprint for logon,
you must enter the correct PIN, password, and/or successfully
swipe the correct fingerprint to use your iPAQ Pocket PC.
When you power on your iPAQ Pocket PC, you will be required
to enter your logon information on the PIN, Password and/or
Fingerprint screen.
Ä
CAUTION: In the event that an incorrect or unsuccessful PIN,
password, and/or fingerprint is repeatedly or incorrectly entered, all
data and programs stored in RAM are erased and the iPAQ Pocket
PC is returned to the as-shipped configuration. It is recommended
that you back up all data frequently when using the security features.
The default number of attempts is six. You can select the maximum
number of attempts.
Logon with No Password
You do not need to enter a password or fingerprint to use the
iPAQ Pocket PC.
Logon Using a 4-digit PIN
You must enter the 4-digit PIN you entered during setup.
1. Turn on your iPAQ Pocket PC.
2. Tap your 4-digit PIN.
3. Tap OK or ENTR.