Filter
Top Products
58
13. FM-3010 CONTROLLABLE MIC
13.7 Monitor Function
The monitor function releases the noise squelch mute of the
microphone only. (An independent noise squelch system is
employed.)
13.8 RF Attenuator Function
➥Push [
LO/DX
] to turn the RF
attenuator function ON and
OFF.
13.9 Call Channel Programming
q Push [
CH/WX
]( )several
times while pushing [
H/L
] to select
the desired channel group (USA,
INT, CAN) to be programmed.
w Push [
16
]( ) for 1 sec. to select
call channel of the selected chan-
nel group.
•“CALL” and call channel number ap-
pear.
e Push [
16
]( )again for 3 sec. (until
a long beep changes to 2 short
beeps) to enter call channel pro-
gramming condition.
•The channel number and channel
group to be programmed blinks.
r Push [
YY
]
/
[
ZZ
] to select the desired
channel.
t Push [
16
]( ) to program the dis-
played channel as call channel.
•The channel number and channel
group stop flashing.
9
9
9
U/I/CDW
Appears when the RF
attenuator function is
in use.
Blinks when the Monitor
function is in use.
➥Push [
SQL
]( )for 1 sec.
to activate the Monitor func-
tion.
•“ ” blinks and audio is emit-
ted.
•Any key cancels the Monitor
function.
L
MONI