Furuno FM-3000 Telephone User Manual


  Open as PDF
of 76
 
26
5.DSC Operation
5.6.6 Transmitting Position Report call
Transmit a Position Report call when you want to anounce
your own position to a specific ship and to get answer, etc.
q Push [
DSC/ENT
] to enter the DSC menu.
w Rotate [
CHANNEL
] to select “POS Report,” push
[
DSC/ENT
].
e Rotate [
CHANNEL
] to select the desired pre-programmed
individual address or “Manual Input,” push
[
DSC/ENT
].
•The ID code for the Position Report call can be set in advance.
(p. 13)
•When “Manual Input” is selected, set the 9-digit ID code
(1st digit must not be ‘0’) for the individual you wish to call by
using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
-After 9-digit is input, push [
DSC/ENT
] to set the ID code.
Note:
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)
SelAddress
Ricky
ManualSet
˘Tom
SelItem
Allships
POSRequest
˘POSReport
r The position information appears. Set the current posi-
tion, push [
DSC/ENT
].
•Edit the digit of your position data by using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
-After editing latitude data, select “N”; North latitude or “S”;
South latitude.
-After editing longitude data, select “E”; East longitude or “W”;
West longitude.
-Push [
HI/LO
] to clear the position data.
t The time information appears. Set the current UTC time,
push [
DSC/ENT
].
•Edit the digit of the current UTC time by using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
-Push [
HI/LO
] to clear the time data.
Inputtime
UTC:
Null˘[H/L]
InputPOS
°.
-°.
Null˘[H/L]
 previous next